Administrator password settings

The administrator password can be set or canceled.

Important

• The password of printer is set at the time of purchase.

  • Default Administrator Password

• The administrator password may be required to change the settings.

1. Check that printer is turned on.

2. Select Setup on the HOME screen.

   • Using Touch Screen

3. Select Printer settings.

   The Printer settings screen is displayed.

4. Select Administrator password settings.

5. If the authentication screen for an administrator password is displayed, enter a password, then select OK.

   When the administrator password is not set, the registration confirmation message is displayed. Select Yes. The message is displayed again. Then, select OK and proceed to step 7.

6. Select Change administrator password.

   When you do not set the administrator password, select Remove administrator password. Select Yes in the displayed screen. The message is displayed again. Then, select OK.

7. Select the effective range of the administrator password.

   Remote UI and other tools

   To change the setting using the remote UI or a certain software, the administrator password needs to be entered.

   LCD, Remote UI, and other tools

   To change the setting using the operation panel of this printer, remote UI or a certain software, the administrator password needs to be entered.

8. Enter the administrator password.

   Enter the password using 8 to 32 alphanumeric characters and symbols.

9. Select Apply.

10. Enter the administrator password again.

11. Select Apply.

    The administrator password is available.

    Note

    • When the administrator password is canceled or the effective range of the administrator password is set to Remote UI and other tools, the user management is disabled.